An essential part of the Tube Mill which enables
cutting of the tube to the preset length with no
burr. The Cold Saw Cut-off system can easily
handle all types of tube profiles -circular,
square, rectangular, oval, etc. It is the most
popular and commonly used technology across
the world.
An HSS blade at controlled rpm and feed goes
through the properly clamped tube without any
heat generation at the tube, as all the heat is
transferred to the chips.
Rollform has since long enjoyed the distinction of
being the largest supplier of Cut-offs in India.
Specifications
| Model |
Tube OD (mm) |
Tube Thickness (mm) |
Mill Speed (m/min) |
| Min |
Max |
Min |
Max |
| RCC 38 | 10 | 38 | 0.5 | 3.0 | 120 |
| RCC 76 | 16 | 76 | 0.7 | 4.0 | 120 |
| RCC 90 | 21 | 90 | 0.7 | 4.5 | 120 |
| RCC 114 | 25 | 114 | 0.9 | 5.0 | 100 |
Features
This process called Cold Cutting, results in clean
cutting of the end without the need for any end
facing or de-chipping even in the hollow section.
The machine is totally numerically controlled
and is very user friendly.
Well suited for low carbon and stainless steel,
the machine is complemented with a Control
Desk with the most modern MMI that provides
the operator with the exact status of production
and extensive fault diagnostics.
Designed to enable quick blade changes, this
piece of equipment reduces down time to a
minimum and ensures smooth and uninterrupted
operation.
The synchronization is achieved with the use
of AC servo motor control system for fastest
response time and best results.
Other Products
