Longitudinally Welded Tube Mills
We produce Tube Mills for various grades of stainless steel which are suitable for ASTM A - Sanitary
Tubes, ASTM A - 312 Industrial Pipes, ASTM A - 249 Heat Exchanger Tubes etc.
Available Options
- In line bright annealing equipment which gives bright annealed tubes for heat exchanger, food and
dairy applications etc.
- Bead rolling system with hydraulic operation for continuous rolling of inside bead.
- An NC Flying Friction/Cold Cut-off system to provide an accurate and programmable length.
- Eddy current tester.
Specifications
Model |
Tube OD (mm) |
Wall Thickness (mm) |
Min |
Max |
Min |
Max |
RSTM 25 |
9.0 | 25.0 |
0.35 | 1.0 |
RSTM 40 | 10.0 | 38.0 | 0.5 | 2.5 |
RSTM 50 | 12.0 | 50.8 | 0.5 | 2.5 |
RSTM 76 | 15.88 | 76.0 | 0.8 | 3.0 |
RSTM 90 | 20.0 | 90.0 | 1.0 | 4.0 |
RTM 100 | 25.0 | 115.0 | 1.2 | 4.5 |
Features
- Cross key ways for permanent and accurate alignment of forming & sizing stands on the base
frames.
- Shafts made out of alloy steel, duly heat treated and ground.
- Horizontal stands made out of SG Cast Iron for higher strength and wear resistance.
- 360 degree revolving turks head for quick and easy roll change. It also permits desired alignment
of weld seam w. r. t. profile corner.
- W-forming system in roll design for better edge forming & freedom from wrinkles while forming
sizes with adverse t/d ratios.
- Roll sets made out of High Carbon High Chromium (HCHCr), D2/D3 grade of alloy steel
manufactured in house on CNC machines.
OTHER Products